Before you commence painting a window sash in sash windows, it is important to prepare properly – the amount of work you will have to do in this regard will depend on the state of the existing paintwork. Remember that repairing sash windows can be a slow task, but it is a necessary task unless you are debating between uPVC or timber sash windows. Replacement sash windows may not need to be painted , but they will be expensive to purchase and install.
If the existing paintwork is reasonably sound, you can probably repaint a window sash without stripping the old paint from the frame. In this case unscrew or take off any metal clasps or sash window locks that are removable, (besides hinges), brush and rub down the frames in order to remove any dirt and repair / fill any small dents, old screw holes, etc, that are apparent. One other point we would like to make. It is best to remove any blinds, curtains, voiles and other close hanging fabrics before you commence. You do not want your beautiful fabric gold curtains to be damaged by paint striper or putty. Any damaged paint work, blisters, knotted areas, etc, should be sanded down, filled with a suitable filler and rubbed down again in order to get a smooth finish. The entire frame should then be sanded with a medium sandpaper and finished with fine sandpaper.
In cases where the paint has deteriorated to the point where is has to be removed completely, again take off all possible additions from the window sashes, before stripping the old paint from the frame. For this operation there are various methods that can be employed, (i.e. a chemical paint stripper or heat gun / blow torch). Once all of the paint has been removed, use firstly medium sandpaper and then fine sandpaper in order to achieve a smooth surface for painting.
When you commence painting the wooden sash windows, first apply a primer coat and when this has dried you should rub the frame with a fine sand paper, just to smooth the surface, not to expose the timberwork.
The Enduring Appeal Of A Window Sash.
You may wish to protect the window sash glass from getting paint by placing masking tape on the glass before commencing. You need to be careful when painting sash windows, a there is a high frame to glass ratio compared to non sash windows. Therefore you do not want to intrude on the glass area with the paint, except with the final coat which should come onto the glass for about 1 millimeter. If paint gets onto the glass wait until it is dry before scraping it off.
Your task will be made easier if you purchase a sash trim brush, a brush which is slightly angled to make it easier to get into 90-degree corners and tight spaces.
If you are starting on the inside of the residence, raise the bottom window sash and lower the top sash and paint the available lower half of the top sash. Use a small paintbrush with not too much paint on the brush at any one time. When you have completed this area, raise the top sash and lower the bottom sash and complete the painting of the top sash.
Once you have completed the top sash you will be able to paint the bottom sash, which is completely visible to you.
Once you have finished painting the sashes, leave them open to dry. Paint the rest of the frame after the sashes are dry to touch.
Then move both sashes down as far as they will go. Paint the exposed jambs. Reverse the process raising both window sashes and paint the lower jambs. Put on only as much paint as is necessary. Wait for the paint to dry and oil the channels with a suitable lubricant, be it paraffin or a silicone spray.
The continual maintenance of your timber sash windows by painting the window sashes, will allow them to give you many additional years of pleasure.
